Cisco SGE2000 - Cisco - Gigabit Switch - Defining Trap Management; Defining Trap Settings

Configuring SNMP
Defining Trap Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 319
12
STEP 4 Click Apply. The device is updated.
Defining Trap Management
This section contains the following topics:
• Defining Trap Settings
• Configuring Station Management
• Defining SNMP Filter Settings
Defining Trap Settings
The Trap Settings Page contains parameters for defining SNMP notification
parameters.
STEP 1 Click System > SNMP > Trap Management > Trap Settings. The Trap Settings
Page
opens:
Trap Settings Page
The
Trap Settings Page contains the following fields: