Configuring VLANs
Defining VLAN Membership
Cisco Small Business SFE/SGE Managed Switches Administration Guide 167
6
• Unit Number — Displays the stacking member for which the VLAN parameters
are displayed.
• Port List — Available ports on the device. Select ports from this list to include in
the VLAN.
• VLAN Members — Ports included in the VLAN.
STEP 3 Define the relevant fields.
STEP 4 In the Port List, select the ports to include in the VLAN and click the adjacent right
arrow. The selected ports then appear in the VLAN Members list.
STEP 5 Click Apply. The VLAN Settings are defined, and the device is updated.
Defining VLAN Membership
The
Port to VLAN Page
contains a table that maps VLAN parameters to ports.
Ports are assigned VLAN membership by toggling through the Port Control
settings.
To Next Page
Loading...
