Cisco SGE2000 - Cisco - Gigabit Switch - Configuring Ports Settings for Layer 3 Enabled Devices

Configuring Ports
Configuring Ports Settings for Layer 3 Enabled Devices
Cisco Small Business SFE/SGE Managed Switches Administration Guide 157
5
STEP 4 Define the relevant fields.
STEP 5 Click Apply. The Port Settings are modified, and the device is updated.
Configuring Ports Settings for Layer 3 Enabled Devices
To define port settings (Layer 3):
STEP 1 Click Bridging > Port Management > Port Settings. The Port Settings Page opens:
Port Settings Page
The
Port Settings Page contains the following fields:
• Copy From Entry Number — Copies the port configuration from the specified
table entry.