Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring System Time
Defining SNTP Settings
Cisco Small Business SFE/SGE Managed Switches Administration Guide 36
3
- Week — The week within the month at which DST ends every year. The
possible field range is 1-5.
- Month — The month of the year in which DST ends every year. The
possible field range is Jan.-Dec.
- Time — The time at which DST ends every year. The field format is
Hour:Minute, for example, 05:30.
STEP 2 Define the relevant fields.
STEP 3 Click Apply. The Time Settings are defined, and the device is updated.
Defining SNTP Settings
The SNTP Settings Page contains information for enabling SNTP servers, as well
as adding new SNTP servers. In addition, the
SNTP Settings Page enables the
device to request and accept SNTP traffic from a server.
To define SNTP global settings:

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x