Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring System Time
Defining System Time
Cisco Small Business SFE/SGE Managed Switches Administration Guide 35
3
- European — The device switches to DST at 1:00 am on the last Sunday
in March and reverts to standard time at 1:00 am on the last Sunday in
October. The
European option applies to EU members, and other
European countries using the EU standard.
- Other — The DST definitions are user-defined based on the device
locality. If Other is selected, the
From and To fields must be defined.
• Time Set Offset — Indicates the difference in minutes between DST and the
local standard time. The default time is 60 minutes.
The following fields are active for non-USA and European countries.
- From — Indicates the time that DST ends in countries other than USA or
Europe in the format in one field and time in another. For example, DST
begins on the 25th October 2007 5:00 am, the two fields will be
25Oct07 and 5:00.
- To — Indicates the time that DST ends in countries other than USA or
Europe in the format in one field and time in another. For example, DST
ends on the 23rd March 2008 12:00 am, the two fields will be 23Mar08
and 12:00.
• Recurring — Select if the DST period in countries other than USA or European
is constant from year to year. The possible field values are:
• From — Indicates the day and time that DST begins each year. For example,
DST begins locally every second Sunday in April at 5:00 am. The possible field
values are:
- Day — The day of the week from which DST begins every year. The
possible field range is Sunday- Saturday.
- Week — The week within the month from which DST begins every year.
The possible field range is 1-5.
- Month — The month of the year in which DST begins every year. The
possible field range is Jan.-Dec.
- Time — The time at which DST begins every year. The field format is
Hour:Minute, for example, 02:10.
• To — Indicates the day and time that DST ends each year. For example, DST
ends locally every fourth Friday in October at 5:00 am. The possible field
values are:
- Day — The day of the week at which DST ends every year. The possible
field range is Sunday-Saturday.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x