Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Viewing Statistics
Viewing Ethernet Statistics
Cisco Small Business SFE/SGE Managed Switches Administration Guide 367
17
• Empty — Displays the device GVRP Empty statistics.
• Leave Empty — Displays the device GVRP Leave Empty statistics.
• Join In — Displays the device GVRP Join In statistics.
• Leave In — Displays the device GVRP Leave in statistics.
• Leave All— Displays the device GVRP Leave all statistics.
The GVRP Error Statistics Table contains the following fields:
• Invalid Protocol ID — Displays the device GVRP Invalid Protocol ID statistics.
• Invalid Attribute Type — Displays the device GVRP Invalid Attribute ID
statistics.
• Invalid Attribute Value — Displays the device GVRP Invalid Attribute Value
statistics.
• Invalid Attribute Length — Displays the device GVRP Invalid Attribute Length
statistics.
• Invalid Event — Displays the device GVRP Invalid Events statistics.
Resetting GVRP Statistics Counters
STEP 2 Click Clear Counters. The GVRP statistics counters are cleared.
Viewing EAP Statistics
The EAP Page contains information about EAP packets received on a specific
port.
To v i e w t h e E A P S t a t i s t i c s :

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x