Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Viewing Statistics
Configuring RMON History
Cisco Small Business SFE/SGE Managed Switches Administration Guide 380
17
Edit RMON Events Page
The
Edit RMON Events Page contains the following fields:
• Entry Event No. — Displays the event entry index number.
• Community — Displays the SNMP community string.
• Description — Displays the user-defined event description.
• Type — Describes the event type. Possible values are:
- None — No action occurs.
- Log — The device adds a log entry.
- Trap — The device sends a trap.
- Log and Trap — The device adds a log entry and sends a trap.
• Owner — Displays the device or user that defined the event.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The event control settings are modified. and the device is updated.
Viewing the RMON Events Logs
The RMON Events Log Page contains a list of RMON events.
STEP 1 Click Statistics > RMON > Events. The RMON Events Page opens:
STEP 2 Click the Events Log button. The RMON Events Log Page opens:

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x