Cisco SGE2000 - Cisco - Gigabit Switch - Page 410

Aggregating Ports
Configuring LACP
Cisco Small Business SFE/SGE Managed Switches Administration Guide 401
18
• Port Priority — Defines the LACP priority value for the port. The field range is 1-
65535.
• LACP Timeout — Administrative LACP timeout. The possible field values are:
- Short — Defines a short timeout value.
- Long — Defines a long timeout value. This is the default value.
Modify LACP Parameter Settings
STEP 2 Click the Edit button. The Edit LACP Page opens:
Edit LACP Page
The
Edit LACP Page contains the following fields:
• Port — Defines the port number to which timeout and priority values are
assigned.
• LACP Port Priority — Defines the LACP priority value for the port. The field
range is 1-65535.
• LACP Timeout — Administrative LACP timeout. The possible field values are:
- Short — Defines a short timeout value.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The device is updated.