Configuring IP Information
IP Addressing
Cisco Small Business SFE/SGE Managed Switches Administration Guide 202
7
• IPv6 Address — Defines the currently configured IPv6 network assigned to
the interface. The address must be a valid IPv6 address, specified in
hexadecimal using 16-bit values between colons.
• MAC Address — Indicates the MAC address mapped to the specified IPv6
address.
• Type — Select the type of the neighbor discovery cache information entry.
The possible field values are:
-
Static
— Shows static neighbor discovery cache entries.
-
Dynamic
— Shows dynamic neighbor discovery cache entries.
STEP 3 Click the Add button. The
Add IPv6 Neighbors Page opens:
The
Add IPv6 Neighbors Page
provides information for adding a static default
gateway.
Add IPv6 Neighbors Page
The Add IPv6 Neighbors Page contains the following fields:
• Interface — Indicates the neighboring IPv6 interface type. The possible field
values are:
-
VLAN
— Displays the neighboring IPv6 VLAN..
• IPv6 Address — Indicates the IPv6 network assigned to the interface. The
address must be a valid IPv6 address, specified in hexadecimal using 16-
bit values between colons.
• MAC Address — Indicates the MAC address mapped to the specified IPv6
address.
STEP 4 Define the relevant fields.
STEP 5 Click Apply. The device is updated.
To Next Page
Loading...
