Cisco SGE2000 - Cisco - Gigabit Switch - Page 210

Configuring IP Information
IP Addressing
Cisco Small Business SFE/SGE Managed Switches Administration Guide 201
7
• Type — Displays the type of the neighbor discovery cache information entry.
The possible field values are:
- Static — Shows static neighbor discovery cache entries.
- Dynamic — Shows dynamic neighbor discovery cache entries.
• State — Specifies the IPv6 Neighbor status. The possible values are:
- Incomplete — Indicates Address Resolution is in process. The neighbor
has not yet responded.
- Reachable — Indicates the neighbor is known to be reachable.
- Stale — Indicates the previously known neighbor is no longer reachable.
No action is taken to verify its reachability, until traffic need to be sent.
- Delay — Indicates the previously known neighbor is no longer
reachable. The Interface is in Delay state for a predefined Delay Time
that if no reachability confirmation is received, the state will change to
Probe.
- Probe — Indicates the neighbor is no longer known to be reachable, and
unicast Neighbor Solicitation probes are being sent to verify reachability.
STEP 2 Click the Edit button. The Edit IPv6 Neighbors Page opens:
Edit IPv6 Neighbors Page
The
Edit IPv6 Neighbors Page contains the following fields:
• Interface — Displays the neighboring IPv6 VLAN number.