Configuring IP Information
IP Addressing
Cisco Small Business SFE/SGE Managed Switches Administration Guide 200
7
STEP 1 Click System > System Management > IP Addressing > IPv6 Configuration > IPv6
Neighbors. The
IPv6 Neighbors Page
opens:
IPv6 Neighbors Page
The
IPv6 Neighbors Page
contains the following fields:
• Clear Table — Deletes the entries in the IPv6 Neighbor Table. The possible
field values are:
-
Static Only
— Deletes the static IPv6 address entries from the IPv6
Neighbor Table.
-
Dynamic Only
— Deletes the dynamic IPv6 address entries from the
IPv6 Neighbor Table.
-
All Static and Dynamic
— Deletes the static and dynamic address
entries IPv6 address entries from the IPv6 Neighbor Table.
• Interface — Indicates the neighboring IPv6 interface type. The possible field
values are:
-
VLAN
— Displays the neighboring IPv6 VLAN number.
• IPv6 Address — Indicates the IPv6 network assigned to the interface.
• MAC Address — Indicates the MAC address mapped to the specified IPv6
address.
To Next Page
Loading...
