Configuring IP Information
IP Addressing
Cisco Small Business SFE/SGE Managed Switches Administration Guide 199
7
• ISATAP Solicitation Interval (10-3600)
—
Specifies the interval between
ISATAP router solicitations messages when there is no active ISATAP router.
The range is 10 - 3600 seconds. The default is 10.
-
Use Default —
Selecting the check box that returns settings to default.
• ISATAP Robustness (10-20)
—
Specifies the number of DNS Query/ Router
Solicitation refresh messages that the device sends. The range is 1 - 20
seconds. The default is 3.
-
Use Default —
Selecting the check box that returns settings to default.
STEP 2 Define the relevant fields.
STEP 3 Click Apply. The ISATAP tunnel is defined, and the device is updated.
Viewing IPv6 Neighbors Information
The
IPv6 Neighbors Page
enables
detecting same subnet node Link Layer
addresses, and for maintaining reachability information about the active neighbors
paths. To define IPv6 Neighbors:
To Next Page
Loading...
