Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Contents
Cisco Small Business SFE/SGE Managed Switches Administration Guide 2
Defining SNTP Authentication 39
Chapter 4: Configuring Device Security 41
Passwords Management 41
Modifying the Local User Settings 43
Defining Authentication 44
Defining Profiles 44
Modifying an Authentication Profile 47
Mapping Authentication Profiles 48
Defining TACACS+ 50
Defining RADIUS 55
Defining Access Methods 60
Defining Access Profiles 61
Defining Profile Rules 65
Defining Traffic Control 72
Defining Storm Control 73
Defining Port Security 76
Defining 802.1X 80
Defining 802.1X Properties 81
Defining Port Authentication 82
Defining Authentication 87
Defining Authenticated Hosts 91
Defining Access Control 92
Defining MAC Based ACL 92
Defining IP Based ACL 100
Defining IPv6 Based ACLs 112
Defining ACL Binding 121
Defining DoS Prevention 123
DoS Global Settings 123
Defining Martian Addresses 125
Defining DHCP Snooping 127

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x