Configuring Device Security
Defining Dynamic ARP Inspection
Cisco Small Business SFE/SGE Managed Switches Administration Guide 143
4
STEP 1 Click Security Suite > ARP Inspection > Properties. The
ARP Inspection Properties
Page
opens:
ARP Inspection Properties Page
The
ARP Inspection Properties Page
contains the following fields:
• Enable ARP Inspection — Enables ARP Inspection on the device. The possible
field values are:
-
Checked
— Enables ARP Inspection on the device.
-
Unchecked
— Disables ARP Inspection on the device. This is the default
value.
• ARP Inspection Validate — Enables ARP Inspection Validation on the device.
The possible field values are:
-
Checked
— Enables ARP Inspection Validation on the device. Source
MAC, Destination MAC, and IP addresses are checked in ARP requests
and responses.
To Next Page
Loading...
