Configuring Device Security
Defining Dynamic ARP Inspection
Cisco Small Business SFE/SGE Managed Switches Administration Guide 149
4
STEP 1 Click Security Suite > ARP Inspection > VLAN Settings. The
ARP Inspection VLAN
Settings Page
opens:
ARP Inspection VLAN Settings Page
The
ARP Inspection VLAN Settings Page
contains the following fields:
• VLAN ID — A user-defined VLAN ID to add to the Enabled VLANs list.
• Enabled VLANs— Contains a list of VLANs in which ARP Inspection is enabled.
Enabled VLAN Table
• VLAN ID — Indicates the VLAN which is bound to the ARP Inspection List.
• List Name — Displays names of static ARP Inspection Lists that were assigned
to VLANs. These lists are defined in the
ARP Inspection List Page.
STEP 2 Select the VLAN name from the VLAN ID list and click Add. This VLAN name then
appears in the list. The
Add VLAN Settings Page
opens:
To Next Page
Loading...
