Configuring VLANs
Defining GVRP Settings
Cisco Small Business SFE/SGE Managed Switches Administration Guide 175
6
Edit GVRP Page
The
Edit GVRP Page
contains the following fields:
• Interface — Port or LAG described by the GVRP settings entry.
• GVRP State — Indicates if GVRP is enabled on the interface. The possible field
values are:
-
Enable
— Enables GVRP on the selected interface.
-
Disable
— Disables GVRP on the selected interface.
• Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on
the interface. The possible field values are:
-
Enable
— Enables Dynamic VLAN creation on the interface.
-
Disable
— Disables Dynamic VLAN creation on the interface.
• GVRP Registration — Indicates if VLAN registration through GVRP is enabled
on the device. The possible field values are:
-
Enable
— Enables GVRP registration on the device.
-
Disable
— Disables GVRP registration on the device.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. GVRP settings are modified, and the device is updated.
To Next Page
Loading...
