Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Managing Device Information
Defining System Information
Cisco Small Business SFE/SGE Managed Switches Administration Guide 10
2
STEP 1 Click System > System Management > System Information. The System
Information Page
opens:
System Information Page
The
System Information Page contains the following fields:
• Model Name — Displays the model name and number of ports supported by
the system.
• System Name — Displays the user configured name of the system.
• System Location — Defines the location where the system is currently running.
The field range is up to 0-160 characters.
• System Contact — Defines the name of the contact person. The field range is
up to 0-160 characters.
• System Object ID — Displays the vendor’s authoritative identification of the
network management subsystem contained in the entity.
• System Up Time — Displays the amount of time that has elapsed since the last
device reset. The system time is displayed in the following format: Days, Hours,
Minutes and Seconds. For example: 41 days, 2 hours, 22 minutes and 15
seconds.
• Base MAC Address — Displays the device MAC address. If the system is in
stack mode, the Base MAC Address of the master unit is displayed.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x