Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring IP Information
IP Addressing
Cisco Small Business SFE/SGE Managed Switches Administration Guide 215
7
STEP 1 Click System > System Management > IP Addressing > DHCP Relay > DHCP
Interfaces. The
DHCP Interfaces Page opens:
DHCP Interfaces Page
The
DHCP Interfaces Page contains the following fields:
• Interface — Displays the interface selected for relay functionality.
• Check Box — Removes DHCP relay from an interface. The possible field values
are:
- Checked — Removes the selected DHCP Relay interface.
- Unchecked — Maintains the selected DHCP Relay interface.
STEP 2 Click the Add button. The Add DHCP Interface Page opens:

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x