EasyManuals Logo

Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Cisco SGE2000 - Cisco - Gigabit Switch
410 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #317 background imageLoading...
Page #317 background image
Configuring SNMP
Configuring SNMP Security
Cisco Small Business SFE/SGE Managed Switches Administration Guide 308
12
Add SNMP Group Membership Page
The Add SNMP Group Membership Page provides information for assigning
SNMP access control privileges to SNMP groups. The
Add SNMP Group
Membership Page
contains the following fields.
User Name — Provides a user-defined local user list.
Engine ID — Indicates either the local or remote SNMP entity to which the user
is connected. Changing or removing the local SNMP Engine ID deletes the
SNMPv3 User Database.
-
Local
— Indicates that the user is connected to a local SNMP entity.
-
Remote
— Indicates that the user is connected to a remote SNMP entity.
If the Engine ID is defined, remote devices receive inform messages.
Group Name — Contains a list of SNMP groups to which the SNMP user
belongs. SNMP groups are defined in the
SNMP Group Profile Page
.
Authentication Method— Indicates the Authentication method used. The
possible field values are:
-
MD5 Key
— Users are authenticated using a valid HMAC-MD5 key.
-
SHA Key
— Users are authenticated using a valid HMAC-SHA-96 key.
-
MD5 Password
— Users should enter a password that is encrypted
using the HMAC-MD5-96 authentication method.
-
SHA Password
— Users should enter a password that is encrypted
using the HMAC-SHA-96 authentication method.
-
None
— No user authentication is used.

Table of Contents

Other manuals for Cisco SGE2000 - Cisco - Gigabit Switch

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SGE2000 - Cisco - Gigabit Switch and is the answer not in the manual?

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General IconGeneral
Form FactorRack-mountable
Switching Capacity48 Gbps
Forwarding Rate35.7 Mpps
LayerLayer 2
Power SupplyInternal
ManagementWeb-based, SNMP, CLI
MAC Address Table Size8000 entries
VLANs256
FeaturesQuality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-20 to 70°C (-4 to 158°F)
Relative Humidity10% to 90% non-condensing
Standards ComplianceIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x

Related product manuals