Managing Device Information
Managing Stacks
Cisco Small Business SFE/SGE Managed Switches Administration Guide 24
2
STEP 1 Click System > System Management > Stack Management. The
Stack Management Page
opens:
Stack Management Page
The
Stack Management Page
contains the following fields:
• Master Election — Indicates the method of electing the master device. The
possible values are:
-
Automatically
— The master is selected automatically by software.
-
Force Maste
r — The unit is forced to be master of the stack. Note that
only Unit 1 or Unit 2 can be the stack master.
• Unit No. — Displays the stacking member unit number for which the stacking
parameters are displayed.
• Model Name — Displays the model name of ports supported by the system.
• Unit No. After Reset — Indicates the new unit number of the stacking member
after the device is reset.
• Uplink — Indicates the next higher stacking unit in the uplink path.
• Downlink — Indicates the next lower stacking unit in the downlink path.
STEP 2 Define the relevant fields.
To Next Page
Loading...
