Configuring SNMP
Defining Trap Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 321
12
STEP 1 Click System > SNMP > Trap Management > Station Management. The
Station
Management Page
opens:
Station Management Page
The
Station Management Page
contains two areas, the
SNMPv1,2 Notification
Recipient
and the
SNMPv3 Notification Recipient
table.
The
SNMPv1,2 Notification Recipient
table area contains the following fields:
• Recipients IP — Indicates the IP address to which the traps are sent.
• Notification Type — Defines the notification sent. The possible field values are:
-
Trap
— Indicates traps are sent.
-
Inform
— Indicates informs are sent.
• Community String — Identifies the community string of the trap manager.
• Notification Version — Determines the trap type. The possible field values are:
-
SNMP V1
— Indicates SNMP Version 1 traps are sent.
-
SNMP V2
— Indicates SNMP Version 2 traps are sent.
• UDP Port — Displays the UDP port used to send notifications. The default is
162.
To Next Page
Loading...
