Configuring SNMP
Defining Trap Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 323
12
Add SNMP Notification Recipient Page
The
Add SNMP Notification Recipient Page
contains information for defining filters
that determine whether traps are sent to specific users, and the trap type sent.
SNMP notification filters provide the following services:
• Identifying Management Trap Targets
• Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
The
Add SNMP Notification Recipient Page
contains the following fields:
• Supported IP Format — Indicates the supported IP version. The possible
values are:
- — Indicates the device supports IPv6.
- — Indicates the device supports IPv4.VLANthe VLAN is defined as the
Local Link Interface.
• Recipient IP — Indicates the IP address to whom the traps are sent.
• Notification Type — Defines the notification sent. The possible field values are:
To Next Page
Loading...
