Configuring SNMP
Defining Trap Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 325
12
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The SNMP Notification Recipient settings are defined, and the device
is updated.
Modifying SNMP Notifications
The
Edit SNMP Notification Recipient Page
allows system administrators to define
notification settings. The
Edit SNMP Notification Recipient Page
is divided into four
areas, Notification Recipient, SNMPv1,2 Notification Recipient, SNMPv3
Notification Recipient and UDP Port Notification Recipient.
STEP 1 Click System > SNMP > Security > Trap Management > Station Management.
STEP 2 Click the Edit button. The
Edit SNMP Notification Recipient Page
opens:
Edit SNMP Notification Recipient Page
The
Edit SNMP Notification Recipient Page
contains the following fields:
• Recipients IP— Indicates the IP address to whom the traps are sent.
• Notification Type — Defines the notification sent. The possible field values are:
-
Trap
— Indicates traps are sent.
To Next Page
Loading...
