Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Managing System Files
Copy Files
Cisco Small Business SFE/SGE Managed Switches Administration Guide 334
13
STEP 1 Click Admin > File Management > Copy Files. The Copy Files Page opens:
Copy Files Page
The
Copy Files Page contains the following fields:
• Copy Master Firmware — Indicates the Stacking Master image or boot file to
copy. The possible field values are:
- Source — Copies the current Stacking Master’s firmware.
- Destination Unit — Defines the stacking member to which the firmware
is downloaded.
• Copy Configuration — Indicates the device configuration file to copy and the
intended usage of the copied file (Running, Startup, or Backup).
- Source File Name — Indicates the type of configuration file to copy from
the device.
- Destination File Name — Indicates the file to be copied to the
destination device.
STEP 2 Define the relevant fields.
STEP 3 Click Apply. The device is updated.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x