Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Managing System Logs
Viewing Remote Logs
Cisco Small Business SFE/SGE Managed Switches Administration Guide 360
16
- Critical — The third highest warning level. A critical log is saved if a
critical device malfunction occurs; for example, two device ports are not
functioning, while the rest of the device ports remain functional.
- Error — A device error has occurred, for example, if a single port is
offline.
- Warning — The lowest level of a device warning. The device is
functioning, but an operational problem has occurred.
- — The system is functioning properly, but system notice has occurred.
- Informational — Provides device information.
- Debug — Provides debugging messages.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The device is updated.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x