Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Aggregating Ports
Defining LAG Settings
Cisco Small Business SFE/SGE Managed Switches Administration Guide 398
18
Edit LAG Page
The
Edit LAG Page contains the following fields:
• LAG — Displays the LAG ID number.
• Description — Displays the user-defined port name.
• LAG Type — Indicates he port types that comprise the LAG.
• Admin Status — Enables or disables traffic forwarding through the selected
LAG.
• Current LAG Status — Indicates if the LAG is currently operating.
• Reactivate Suspended LAG — Reactivates a port if the LAG has been disabled
through the locked port security option or through Access Control List
configurations.
• Operational Status — Indicates whether the LAG is currently operational or
non-operational.
• Admin Auto Negotiation — Enables or disables Auto Negotiation on the LAG.
Auto-negotiation is a protocol between two link partners that enables a LAG to

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x