Configuring Device Security
Defining Authentication
Cisco Small Business SFE/SGE Managed Switches Administration Guide 54
4
Edit TACACS+ Server Page
The
Edit TACACS+ Server Page
contains the following fields:
• Host IP Address — Defines the TACACS+ Server IP address.
• Priority — Defines the order in which the TACACS+ servers are used. The
default is 0.
• Source IP Address — Defines the device source IPv4 address used for the
TACACS+ session between the device and the TACACS+ server.
• Key String — Defines the authentication and encryption key for TACACS+
server. The key must match the encryption key used on the TACACS+ server.
• Authentication Port — Defines the port number through which the TACACS+
session occurs. The default is port 49.
• Timeout for Reply — Defines the amount of time that passes before the
connection between the device and the TACACS+ server times out. The field
range is 1-30 seconds.
• Status — Displays the connection status between the device and the
TACACS+ server. The possible field values are:
-
Connected
— Indicates there is currently a connection between the
device and the TACACS+ server.
-
Not Connected
— Indicates there is no current connection between the
device and the TACACS+ server.
• Single Connection — Maintains a single open connection between the device
and the TACACS+ server when selected
• Use Default — Indicates that the factory default value is used.
To Next Page
Loading...
