Dell PowerConnect 3524

SSH Commands 391
SSH Commands
ip ssh port
The ip ssh port Global Configuration mode command specifies the port to be used by the SSH
server. Use the no form of this command to return to the default configuration.
Syntax
• ip ssh port port-number
• no ip ssh port
• port-number — Port number for use by the SSH server. (Range: 1 - 65535)
Default Configuration
The default port number is 22.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the port to be used by the SSH server as 8080.
ip ssh server
The ip ssh server Global Configuration mode command enables the device to be configured from a
SSH server. Use the no form of this command to disable this function.
Syntax
• ip ssh server
• no ip ssh server
Console(config)# ip ssh port 8080
book.book Page 391 Thursday, December 18, 2008 7:40 PM