EasyManuals Logo

Dell PowerConnect 3524 User Manual

Dell PowerConnect 3524
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #306 background imageLoading...
Page #306 background image
306 QoS Commands
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
qos trust (Global)
The qos trust Global Configuration mode command configures the system to the basic mode and trust
state. Use the no form of this command to return to the untrusted state.
Syntax
qos trust
{
cos
|
dscp
}
no qos trust
cos
— Indicates that ingress packets are classified with packet CoS values. Untagged packets are
classified with the default port CoS value.
dscp
— Indicates that ingress packets are classified with packet DSCP values.
Default Configuration
CoS is the default trust mode.
Command Mode
Global Configuration mode.
User Guidelines
Packets entering a quality of service (QoS) domain are classified at the edge of the QoS domain. When
packets are classified at the edge, the switch port within the QoS domain can be configured to one of
the trusted states because there is no need to classify the packets at every device in the domain.
Use this command to specify whether the port is trusted and which fields of the packet to use to
classify traffic.
When the system is configured as trust DSCP, traffic is mapped to a queue according to the DSCP-
queue map.
Console(config)# qos map dscp-queue 33 40 41 to 1
book.book Page 306 Thursday, December 18, 2008 7:40 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 3524 and is the answer not in the manual?

Dell PowerConnect 3524 Specifications

General IconGeneral
Throughput9.5 Mpps
Number of queues4
MAC address table8000 entries
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
10G supportNo
Number of VLANs256
Flow control supportYes
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Input frequency50/60 Hz
Weight (imperial)11 lbs
Dimensions (WxDxH)440 x 257 x 43.2 mm
Networking featuresGigabit Ethernet, Fast Ethernet
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Dimensions (W x D x H) (imperial)17.3 x 10.12 x 1.7 \
Switch typeManaged
Switch layerL2
Data link protocolsEthernet
Supported network protocolsHTTP, HTTPS/SSL, SSH
Power connectorDC-in jack
Gigabit Ethernet (copper) ports quantity2
Basic switching RJ-45 Ethernet ports quantity24
Product colorBlack
Power sourceAC
Input voltage100 - 240 V
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight5000 g

Related product manuals