Dell PowerConnect 3524

SNMP Commands 355
show snmp filters
The show snmp filters Privileged EXEC mode command displays the configuration of filters.
Syntax
• show snmp filters [ filtername ]
• filtername — Specifies the name of the filter. (Range: 1 - 30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of filters.
Console# show snmp filters
Name OID Tree Type
----------- ----------------------- ---------
user-filter 1.3.6.1.2.1.1 Included
user-filter 1.3.6.1.2.1.1.7 Excluded
user-filter 1.3.6.1.2.1.2.2.1.*.1 Included
book.book Page 355 Thursday, December 18, 2008 7:40 PM