118 Address Table Commands
show bridge multicast address-table static
The show bridge multicast address-table static Privileged EXEC mode command displays the statically
configured multicast addresses.
Syntax
•
show bridge multicast address-table static
[
vlan
vlan-id
]
[
address
mac-multicast-address
|
ip-multicast-
address
] [
source
ip-address
]
•
vlan-id
— Indicates the VLAN ID. This has to be a valid VLAN ID value.
•
mac-multicast-address
— A valid MAC multicast address.
•
ip-multicast-address —
A valid IP multicast address.
•
ip-address
— Source IP address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
A MAC address can be displayed in IP format only if it's in the range 0100.5e00.0000 through
0100.5e7f.ffff.
Example
Console# show bridge multicast address-table static
MAC-GROUP table
Vlan MAC Address Type Ports
---- -------------- ------- ----------
1 0100.9923.8787 static 1/e1, 2/e2
Forbidden ports for multicast addresses:
Vlan MAC Address Ports
---- -------------- -----
book.book Page 118 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
