374 Spanning-Tree Commands
Example
The following example exits the MST configuration mode and saves changes.
abort (mst)
The abort MST Configuration mode command exits the MST configuration mode without applying the
configuration changes.
Syntax
•
abort
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode without saving changes.
Console(config)# spanning-tree mst configuration
Console(config-mst)# exit
Console(config)# spanning-tree mst configuration
Console(config-mst)# abort
book.book Page 374 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
