Dell PowerConnect 3524

TIC Commands 447
Example
The following example reactivates a suspended user with username bob.
set line active
The set line active Privileged EXEC mode command reactivates a locked line.
Syntax
• set line {console | telnet | ssh} active
• console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example reactivates the line for a virtual terminal for remote console access.
set enable-password active
The set enable-password active Privileged EXEC mode command reactivates a locked enable password.
Syntax
• set enable-password level active
• level — The user level. (Range: 1 - 15)
Default Configuration
This command has no default configuration.
Console# set username bob active
Console# set line telnet active
book.book Page 447 Thursday, December 18, 2008 7:40 PM