352 SNMP Commands
The following table describes significant fields shown above.
show snmp engineid
The show snmp engineID Privileged EXEC mode command displays the ID of the local Simple Network
Management Protocol (SNMP) engine.
Syntax
• show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
Field Description
Community-string Community access string to permit access to the SNMP protocol.
Community-access Type of access - read-only, read-write, super access
IP Address Management station IP Address.
Trap-Rec-Address Targeted Recipient
Trap-Rec-Community Statistics sent with the notification operation.
Version SNMP version for the sent trap 1 or 2.
Console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878
book.book Page 352 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
