Dell PowerConnect 3524

38 Command Groups
Configuration and Image Files Commands
sntp broadcast client
enable
Enables the Simple Network Time Protocol
(SNTP) Broadcast clients.
Global Configuration
sntp anycast client enable Enables Anycast clients. Global Configuration
sntp client enable Enables the Simple Network Time Protocol
(SNTP) Broadcast and Anycast client on an
interface.
Global Configuration
sntp client enable
(Interface)
Enables the Simple Network Time Protocol
(SNTP) client on an interface.
Interface
Configuration
sntp unicast client enable Enables the device to use the Simple Network
Time Protocol (SNTP) to request and accept
Simple Network Time Protocol (SNTP) traffic
from servers.
Global Configuration
sntp unicast client poll Enables polling for the Simple Network Time
Protocol (SNTP) predefined Unicast clients.
Global Configuration
sntp server Configures the device to use the Simple
Network Time Protocol (SNTP) to request and
accept Simple Network Time Protocol (SNTP)
traffic from a server.
Global Configuration
show clock Displays the time and date from the system
clock.
User EXEC
show sntp configuration Shows the configuration of the Simple Network
Time Protocol (SNTP).
Privileged EXEC
show sntp status Shows the status of the Simple Network Time
Protocol (SNTP).
Privileged EXEC
Command Group Description Access Mode
copy Copies files from a source to a destination. Privileged EXEC
delete Deletes a file from a Flash memory device. Privileged EXEC
delete startup-config Deletes the startup-config file. Privileged EXEC
dir Displays a list of files on a flash file system. Privileged EXEC
more Displays a file. Privileged EXEC
rename Renames a file. Privileged EXEC
boot system Specifies the system image that the device loads at
startup.
Privileged EXEC
book.book Page 38 Thursday, December 18, 2008 7:40 PM