Command Modes 73
ML (MAC Access-List) Mode
PE (Privileged EXEC) Mode
instance (mst) Maps VLANs to the MST instance.
name (mst) Defines the configuration name.
revision (mst) Defines the configuration revision number.
show (mst) Displays the current or pending MST region configuration.
Command Group Description
permit (MAC) Denies traffic if the conditions defined in the permit statement match.
Command Group Description
boot system Specifies the system image that the device loads at startup.
clear arp-cache Deletes all dynamic entries from the ARP cache.
clear bridge Removes any learned entries from the forwarding database.
clear counters
Clears statistics on an interface.
clear gvrp statistics Clears all the GVRP statistics information.
clear host Deletes entries from the host name-to-address cache.
clear host dhcp Deletes entries from the host name-to-address mapping received from
Dynamic Host Configuration Protocol (DHCP).
clear ip dhcp snooping database Clears the DHCP snooping binding database.
clear logging Clears messages from the internal logging buffer.
clear logging file Clears messages from the logging file.
clear spanning-tree detected-
protocols
Restarts the protocol migration process on all interfaces or on the
specified interface.
clock set Manually sets the system clock.
configure Enters the Global Configuration mode.
copy Copies files from a source to a destination.
crypto certificate request Generates and displays certificate requests for HTTPS.
delete Deletes a file from a Flash memory device.
delete startup-config Deletes the startup-config file.
dir Displays a list of files on a flash file system.
book.book Page 73 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
