Dell PowerConnect 3524

Tunnel 453
Tunnel
interface tunnel
The interface tunnel Global Configuration mode command enters tunnel interface configuration
mode.
Syntax
• interface tunnel number
• number — Tunnel index. (Range: 1)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enters tunnel interface configuration mode to configure tunnel 1.
tunnel mode ipv6ip
The tunnel mode ipv6ip Interface Tunnel Configuration mode command configures an IPv6
transition mechanism global support mode. Use the no form of this command to remove the IPv6
transition mechanism.
Console (config)# interface tunnel 1
Console (config-tunnel)#
book.book Page 453 Thursday, December 18, 2008 7:40 PM