188 GVRP Commands
Example
The following example displays GVRP configuration information:
show gvrp statistics
The show gvrp statistics User EXEC mode command displays GVRP statistics.
Syntax
•
show gvrp statistics
[
ethernet
interface
|
port-channel
port-channel-number
]
•
interface
— A valid Ethernet port. (Full syntax:
unit/port
)
•
port-channel-number
— A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Console> show gvrp configuration
GVRP Feature is currently enabled on the device.
Timers (milliseconds)
Port(s) Status Registration Dynamic VLAN
Creation
Join Leave Leave All
------ ------- ------------ ----------- ---- ----- ---------
2/e1 Enabled Normal Enabled 200 600 10000
4/e4 Enabled Normal Enabled 200 600 10000
book.book Page 188 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
