Dell PowerConnect 3524

Port Channel Commands 291
Port Channel Commands
interface port-channel
The interface port-channel Global Configuration mode command enters the interface
configuration mode to configure a specific port-channel.
Syntax
• interface port-channel port-channel-number
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• Eight aggregated links can be defined with up to eight member ports per port-channel.
The aggregated links’ valid IDs are 1-15.
Example
The following example enters the context of port-channel number 15.
interface range port-channel
The interface range port-channel Global Configuration mode command enters the interface
configuration mode to configure multiple port-channels.
console(config)# inter port-channel 15
console(config-if)# 1
book.book Page 291 Thursday, December 18, 2008 7:40 PM