Dell PowerConnect 3524

372 Spanning-Tree Commands
revision (mst)
The revision MST configuration command defines the MST region revision number. Use the no form of
this command to return to the default configuration.
Syntax
• revision value
• no revision
• value — Configuration revision number. (Range: 0 - 65535)
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
show (mst)
The show MST Configuration mode command displays the current or pending MST region
configuration.
Syntax
• show {current | pending}
• current — Indicates the current region configuration.
•
pending — Indicates the pending region configuration.
Default Configuration
This command has no default configuration.
Console(config)# spanning-tree mst configuration
Console(config-mst)# revision 1
book.book Page 372 Thursday, December 18, 2008 7:40 PM