516 802.1x Commands
Examples
The following example uses the aaa authentication dot1x default command with no authentication.
dot1x system-auth-control
The dot1x system-auth-control Global Configuration mode command enables 802.1x globally. Use the
no form of this command to return to the default configuration.
Syntax
•
dot1x system-auth-control
• no dot1x system-auth-control
Default Configuration
802.1x is disabled globally.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1x globally.
dot1x port-control
The dot1x port-control Interface Configuration mode command enables manually controlling the
authorization state of the port. Use the no form of this command to return to the default configuration.
Console(config)# aaa authentication dot1x default none
Console(config)# dot1x system-auth-control
book.book Page 516 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
