GVRP Commands 189
Example
The following example shows GVRP statistical information.
show gvrp error-statistics
The show gvrp error-statistics User EXEC mode command displays GVRP error statistics.
Syntax
•
show gvrp error-statistics
[
ethernet
interface
|
port-channel
port-channel-number
]
•
interface —
A valid Ethernet port. (Full syntax:
unit/port
)
•
port-channel-number
— A valid
port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Console> show gvrp statistics
GVRP Statistics:
Legend:
rJE : Join Empty Received rJIn: Join In Received
rEmp : Empty Received rLIn: Leave In Received
rLE : Leave Empty Received rLA : Leave All Received
sJE : Join Empty Sent sJIn: Join In Sent
sEmp : Empty Sent sLIn: Leave In Sent
sLE : Leave Empty Sent sLA : Leave All Sent
Port rJE rJIn rEmp rLIn rLE rLA sJE sJIn sEmp sLIn
sLE sLA
book.book Page 189 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
