User Interface 467
Example
This example dumps all output immediately after entering a show command.
show history
The show history User EXEC mode command lists the commands entered in the current session.
Syntax
•show history
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
• The buffer includes executed and unexecuted commands.
• Commands are listed from the first to the most recent command.
• The buffer remains unchanged when entering into and returning from configuration modes.
Example
The following example displays all the commands entered while in the current Privileged EXEC mode.
Console> terminal datadump
Console# show version
SW version 3.131 (date 23-Jul-2004 time 17:34:19)
HW version 1.0.0
Console# show clock
15:29:03 Jun 17 2004
Console# show history
show version
show clock
show history
3 commands were logged (buffer size is 10)
book.book Page 467 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
