Dell PowerConnect 3524

LLDP Commands 265
show lldp neighbors
Syntax
• show lldp neighbors [ ethernet interface ]
•
Interface — Ethernet port
Command Modes
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about neighboring devices discovered using Link Layer
Discovery Protocol (LLDP).
console# show lldp neighbors
v
Port Device ID Port ID Hold
Time
Capabilities System Name
---- ------ ---- ------ ------- --------
e1 0060.704C.73FE 1 117 B ts-7800-2
e1 0060.704C.73FD 1 93 B ts-7800-2
e2 0060.704C.73F C 9 1 B, R ts-7900-1
e3
0060.704C.73FB 1 92 W ts-7900-2
console# show lldp neighbors ethernet g1
Device ID: 0060.704C.73FE
Port ID: 1
Hold Time: 117
Capabilities: B
System Name: ts-7800-2
System description:
Port description:
Management address: 172.16.1.1
book.book Page 265 Thursday, December 18, 2008 7:40 PM