356 SNMP Commands
show snmp users
The show snmp users Privileged EXEC mode command displays the configuration of users.
Syntax
•
show snmp users [
username
]
•
username
— Specifies the name of the user. (Range: 1 - 30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of users.
Console# show snmp users
Name Group name Auth Method Remote
------ ------------ --------- -------------------------
John user-group md5
John user-group md5 08009009020C0B099C075879
book.book Page 356 Thursday, December 18, 2008 7:40 PM