Management ACL 249
management access-class
The management access-class Global Configuration mode command restricts management connections
by defining the active management access list. Use the no form of this command to disable this
restriction.
Syntax
•
management access-class
{
console-only
|
name
}
• no management access-class
•
name
— Specifies the name of the access list to be used. (Range: 1-32 characters)
•
console-only
— Indicates that the device can be managed only from the console.
Default Configuration
If no access list is specified, an empty access list is used.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access list called mlist as the management access list.
show management access-list
The show management access-list Privileged EXEC mode command displays management access-lists.
Syntax
•
show management access-list
[
name
]
•
name
— Specifies the name of a management access list. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Console(config)# management access-class mlist
book.book Page 249 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
