Dell PowerConnect 3524

System Management 433
Example
The following example specifies the asset tag of the master unit as "1qwepot".
show system id
The show system id User EXEC mode command displays system ID information.
Syntax
• show system id [ unit unit ]
•
unit — Specifies the number of the unit. (Range: 1 - 6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays system service and asset tag information.
Console(config)# asset-tag 1qwepot
Console> show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957
Unit Service tag Serial number Asset tag
---- ----------- ------------ ---------
1 89788978 893659782 7843678957
2 34254675 3216523877 5621987728
book.book Page 433 Thursday, December 18, 2008 7:40 PM