172 Ethernet Configuration Commands
Examples
The following examples display autonegotiation information.
show interfaces configuration
The show interfaces configuration Privileged EXEC mode command displays the configuration for all
configured interfaces.
Console# show interfaces advertise
Port Type Neg Operational Link Advertisement
---- ----------- ------- ------------------------------
1/e1 100M-Copper Enabled --
1/e2 100M-Copper Enabled --
1/e3 100M-Copper Enabled --
1/e4 100M-Copper Enabled --
1/e5 100M-Copper Enabled 100f, 100h, 10f, 10h
1/e6 100M-Copper Enabled --
1/e7 100M-Copper Enabled --
1/e8 100M-Copper Enabled --
1/e9 100M-Copper Enabled --
1/e10 100M-Copper Enabled --
1/e11 100M-Copper Enabled --
1/e12 100M-Copper Enabled --
1/e13 100M-Copper Enabled --
1/e14 100M-Copper Enabled --
1/e15 100M-Copper Enabled --
1/e16 100M-Copper Enabled --
1/e17 100M-Copper Enabled --
1/e18 100M-Copper Enabled --
1/e19 100M-Copper Enabled --
1/e20 100M-Copper Enabled --
book.book Page 172 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
