Dell PowerConnect 3524

DHCP Snooping 157
Example
The following example configures the DHCP snooping binding file.
ip dhcp snooping database update-freq
The ip dhcp snooping database update-freq Global Configuration mode command configures the
update frequency of the DHCP snooping binding file. Use the no form of this command to return to
default.
Syntax
• ip dhcp snooping database update-freq seconds
• no ip dhcp snooping database update-freq
• seconds — Specifies the update frequency in seconds. (Range 600 – 86400)
Default Configuration
The default configuration is 1200.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the update frequency of the DHCP snooping binding file to be 24000
seconds.
ip dhcp snooping binding
The ip dhcp snooping binding Privileged EXEC mode command configures the DHCP snooping
binding database and adds binding entries to the database. Use the no form of this command to delete
entries from the binding database.
console(config)#ip dhcp snooping database
console(config)# ip dhcp snooping database update-freq 24000
book.book Page 157 Thursday, December 18, 2008 7:40 PM