GVRP Commands 187
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example clears all GVRP statistical information on Ethernet port 1/e6.
show gvrp configuration
The show gvrp configuration User EXEC mode command displays GVRP configuration information,
including timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are
running GVRP.
Syntax
•
show gvrp configuration
[
ethernet
interface
|
port-channel
port-channel-number
]
•
interface
— A valid Ethernet port. (Full syntax:
unit/port
)
•
port-channel-number
— A valid
port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
console# clear gvrp statistics ethernet 1/e6
book.book Page 187 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
